Real Time Car GPS Tracker

GPS/GPRS based tracking device specially developed and designed for vehicle real-time tracking and fleet management

Inbuilt GPS module to obtain accurate position data and utilizes its GSM capability to send 

the position data to a specified mobile phone or server base for tracking and fleet management. 

With internal memory, can store data when there is no GPRS connection or at a specified interval 

requested by the user.

Specifications:

Description for GPS tracking:

1. GSM: Quad-band: GSM850 / E-GSM900 / DCS1800 / PCS1900
2. u-bloxI GPS modulet with high GPS positioning accuracy
3. Voice SMS, GPRS TCP / UDP communications
4. Track by cell phone or web based tracking software
5. Real-time tracking (Time, Distance Interval or Intelligent Mode)
6. Intelligent power management: normal, sleep, deep sleep
7. Different GPRS data sending modes for saving GPRS traffic: sending data in engine on or tremble state; stop sending data in engine off or still state
8. 16Mb flash memory for data storage in GSM blind area
9. Sleep mode for Saving Power and GPRS traffic
10. Backup battery of 900 mAh Li Ion battery 
11. Alarm types: Over-speed, Low power,Tremble, Parking, SOS,exterior power off
12. Control car doors close/open, Detect the status of engine on/off
13. Real-time tracking (Time, Distance Interval or Intelligent Mode)
14. Internal power low / lost alarm
15. Geo-fencing reports
16. Motion sensor for vehicle motion detections

Special Features:

1. Real time tracking and history data traces tracking
2. 3-Axis Digital Accelerometer movement status monitoring
3. Firmware update by OTA
4. Support DC 9v --60v , overvoltage protection
5. Send commands to GPS trackers via GPRS
6. Send GPRS data to IP or domain name
7. 16Mb Flash Memory( stores 8000pcs or so data)
8. Fuel/oil level detection with high accuracy
9. Google map link sent via SMS
10. Voice monitoring function with microphone

Hardware Spec:

1. ARM 32-bit Cortex™-M3 CPU STM32MCU Module 
2. Quad Band Communications Module- 850/900/1800/1900Mhz 
3. U-Blox NEO-6M GPS Module 
4. 32Mb Flash memory 
5. 3 Axis Accelerometer
6. 3 x Digital Inputs (2 Positive/4 Negative) 
7. 1 x Analog Inputs (Voltage Monitoring) 
8. 3 x Digital Outputs (Negative Triggers) 
9. 1 x 1-Wire (iButton or Temperature)
10. 1 x RS232
11. 2 x SMA Aerial Connectors 
12. 

     Mr. Leaper Liao
    
    Tel: 86-755-85274693
    

    Contact to this supplier